Mold Remediation

During attic mold remediation, our first step is to determine the extent of the damage and provide you with an honest assessment of what needs to be done. We’ll then take active steps to remove any mold that is currently present and check your insulation for any damage. Next, we’ll provide complete attic mold remediation measures that will not only resolve the current mold problem, but also provide a permanent solution, so you no longer have concerns about mold growing again.

Signs that you should call in a professional from Green Energy Saving Insulation Inc. for attic mold remediation include any scenario in which you have sustained water damage, you are experiencing unexplained indoor air quality issues that have been unresolved using other measures, or you have discovered attic mold after visiting your attic space for some other reason.

At Green Energy Saving Insulation Inc., we will gladly assist you with attic mold remediation and a variety of other mold and insulation services at your home or business





I Think I Have Mold In My Attic… Now What?

Mold can commonly be found growing in attics. Attic mold growths can have a variety of causes. Inadequate ventilation is one major contributing factor. In northern climates warm moist air from people and their activities rises up toward and through the ceiling (around light fixtures , trap doors etc. ) where if the attic is well ventilated it passes to the outside. If the attic is poorly ventilated the moisture will condense on cool/cold surfaces where it can serve as focus for mold growth. When the temperature is very cold you may even have icicles growing in your attic.

Attic ventilation is crucial to the health of not only your home but you and your family. Many people with chronic allergies do not even realize that their home is the source!

Proper attic ventilation requirements are usually specified in local building codes but rarely followed by builders/remodelers. With today’s multiple roof lines and/or cathedral ceilings, there are variety of trades involved that rarely insure proper ventilation.

In minor cases mold can be seen growing on the roof framing very close to sites where moist air is passing through the ceiling. In the worst case, heavy mold infestation may be seen on most roof rafters and roof sheathing and/or attic insulation.

If the attic has light to moderate mold growth it may be sufficient to install attic ventilation. With some localized cleaning, you may not have to do more than this. However, if the attic has a heavy mold infestation, just correcting the ventilation is not enough. Complete removal of the mold and in extreme cases the insulation must be replaced as well.


  • Improper intake and/or exhaust ventilation

  • Insufficient and/or missing insulation

  • Blocked ventilation

  • Bath fan(s) exhausting into attic

  • High humidity

  • Roof leak(s)


When Green Energy Saving Insulation, Inc. arrives at your home, we will thoroughly inspect and evaluate your mold situation, from the interior and exterior. After the inspection , we will give you an assessment and a correct fix for your specific situation.

Talk to your Green Energy Saving Insulation , Inc. representative today for the remediation process that will solve your particular issue(s). The most important thing to remember is that we “Remediate” not “Encapsulate”, ask what the difference is!